ISO 16000-3:2022

مواصفة قياسية دولية   الإصدار الحالي
· اعتمدت بتاريخ 22 سبتمبر 2022 ·

Indoor air — Part 3: Determination of formaldehyde and other carbonyl compounds in indoor and test chamber air — Active sampling method

الأجواء المحيطة
* تشمل التهوية الداخلية

ملفات الوثيقة ISO 16000-3:2022

null صفحات
الإصدار الحالي

مجال الوثيقة ISO 16000-3:2022

This document specifies a determination of formaldehyde (HCHO) and other carbonyl compounds (aldehydes and ketones) in air. The method is specific to formaldehyde but, with modification, at least 12 other aromatic as well as saturated and unsaturated aliphatic carbonyl compounds can be detected and quantified. It is suitable for determination of formaldehyde and other carbonyl compounds in the approximate concentration range 1 µg/m3 to 1 mg/m3. The sampling method gives a time-weighted average (TWA) sample. It can be used for long-term (1 h to 24 h) or short-term (5 min to 60 min) sampling of air for formaldehyde.

This document specifies a sampling and analysis procedure for formaldehyde and other carbonyl compounds that involves collection from air on to adsorbent cartridges coated with 2,4-dinitrophenylhydrazine (DNPH) and subsequent analysis of the hydrazones formed by high performance liquid chromatography (HPLC) with detection by ultraviolet absorption[12],[16]. The method is not suitable for longer chained or unsaturated carbonyl compounds.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-2:2013
GSO 150-2:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-1:2013
GSO 150-1:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية
GSO 150-1:2013
 
لائحة فنية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية

اعتمدت مؤخراً

ISO 12224-1:2024
 
مواصفة قياسية دولية
Solder wire, solid and flux-cored — Specification and test methods — Part 1: Classification and performance requirements
ISO 33405:2024
 
مواصفة قياسية دولية
Reference materials — Approaches for characterization and assessment of homogeneity and stability
ISO 33406:2024
 
مواصفة قياسية دولية
Approaches for the production of reference materials with qualitative properties
ISO 12224-2:2024
 
مواصفة قياسية دولية
Solder wire, solid and flux-cored — Specification and test methods — Part 2: Determination of flux content